خوش آمدید, میهمان! [ ثبت نام | ورود

59,865.00

Parking Guidance Display factory

توضیحات

Dial mode of Indoor LED Display:
Setting of dial switch is explained as below:
Dial switch (total 8 digits, from the left to the right: low order to high order) is used to set communication address of LED display. ON is 1, in which 1-5 is RS485 communication address digit, binary dial. The range of the corresponding communication address is 1-30. 6 and 7 refer to the setting digits controlling the arrow direction nearby the dial switch of the LED display. 8 and 9 refer to the setting digits controlling the arrow direction far away from the dial switch of the LED display (For one-way screen, 8 and 9 refer to the reservation digits. If used normally, it is 0). 10 refer to the RS485 short connection digit, as shown in the following diagram:
Dial switchCommunication address (Add)Other configurations
Dial digit12345678910
Dial explanation124816Direction setting of arrow screen 1 (adjacent to the dial switch arrow)Arrow setting of arrow screen 2 (far away from the dial switch). Notes: for Single-directional LED display, 8 and 9 refer to the reservation digits.terminal resistance setting
Communication address digit, in which 1, 2, 4, 8 and 16 refer to the decimalism digits represented by the dial digit. Its sum refers to the communication address of the device.Parking Guidance Display factory
website:http://www.wanboiot.com/parking-guidance-display/

کل بازدید14 نفر, 1 نفر امروز

  

شناسه آگهی: 9125b2086a3982fb

گزارش خرابی

Processing your request, Please wait....

لینکهای حامیان ما

ارسال نظر